Pre Cubed Packaging Foam and Cubed Foam Inserts
Pre cubed foam is ideal for fitting all sorts of equipment into carry cases securely and is completely customizable.
Each pack contains pre-cubed foam grid layers that are pre-scored with removable foam cubes/plugs, and thin lining foam layers that can be used at the lid and bottom of the case and between pre-cubed foam layers.
Simply lay out your items on the grid with adequate space between them, and remove the plugs to create a snug and protective space for each item.
We stock 3 types of pre-cubed foam:
1. Black high load bearing open cell polyether, packaging foam.
2. White or Grey Ethafoam very high load bearing semi-rigid foam, ideal for heavy items. More information on Ethafoam.
3. Pink Antistatic (ESD) foam, perfect for packaging electronic items. More information on Pink Antistatic ESD foam.
Pre-cubed Foam can be easily cut to size to match the size of your case. For bespoke sizes, please contact us.
Pre Cubed black packaging foamEach pack contains pre cubed foam and lining foam layers. Each side of the removable plugs in the pre cubed grid is 25mm (1"). Dimensions are 560 x 350mm (22" x 13.8"); the lining foam is 12mm thick. |
 |
Pre Cubed pink antistatic AS22 foamEach pack contains pre cubed foam and lining foam layers. Each side of the removable plugs in the pre cubed foam grid is 25mm (1"). Dimensions are 560 x 350mm (22" x 13.8"); the lining foam is 12mm thick. |
 |
Pre cubed semi-rigid white EthafoamMade from white Ethafoam which is much firmer, ideal for heavier equipment. Each pack contains Pre Cubed Ethafoam and Ethafoam lining layers. Each side of the removable plugs in the Pre Cubed grid is 25mm (1"). Dimensions are 560 x 350mm (22" x 13.8"); the lining foam is 12mm thick. |
 |
Pre cubed semi-rigid Black EthafoamMade from black Ethafoam which is much firmer, ideal for heavier equipment. Each pack contains Pre Cubed Ethafoam and Ethafoam lining layers. Each side of the removable plugs in the Pre cubed foam grid is 25mm (1"). Dimensions are 560 x 350mm (22" x 13.8"); the lining foam is 12mm thick. |
 |
UK's largest pre-cubed packaging foam inserts supplier
Pre Cubed Foam - Pulling Steps:
Step 1, Mark the foam
Arrange your items leaving adequate space between each item.
When satisfied with the layout, draw arround the items with chalk or mark with toothpicks.
|
Step 2, Pull the foam
Carefully and slowly remove each plug/cube of foam in one piece.
|
Step 3, Insert the items
Insert the items into their cutouts with a snug fit, without compressing the foam too much.
To fix any loose areas, put back enough removed plugs and secure them with our spray contact adhesive.
|
